Columbia Kermit/kermit.zip/newsgroups/misc.19950329-19950528/[e-mail]_Wed May 24 07:52:52 1995.msg

Internet Message Format | 2020-01-01 | 2KB

Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA14990
  (5.65c+CU/IDA-1.4.4/HLK for <[e-mail]>); Wed, 24 May 1995 06:03:31 -0400
Received: by apakabar.cc.columbia.edu id AA20699
  (5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Wed, 24 May 1995 06:03:29 -0400
Path: news.columbia.edu!sol.ctr.columbia.edu!howland.reston.ans.net!news.nic.surfnet.nl!knmi.nl!usenet
From: vdberg <[e-mail]>
Newsgroups: comp.protocols.kermit.misc
Subject: Z-modem in Kermit
Date: 24 May 1995 07:52:52 GMT
Organization: KNMI, de Bilt, The Netherlands
Lines: 23
Message-Id: <3puokk$[e-mail]>
Nntp-Posting-Host: btp069.knmi.nl
Apparently-To: [e-mail]

hello everyone,
We have a small (big) problem. Recently we acquired a Netblazer system
with Telebit modems as a modempool. This modem pool is reacheable via
our LAN and from an Ultrix system we can do a 'TELNET' to this
modempool. With Kermit this works fine, but some of our users still
want to communicate with a Z-modem protocol. Now there is our problem,
because we cannot find a xyz-modem application which supports a
telnet to the Netblazer on an Ultrix (or OSF1) machine. It should be
possible, however, to use a Z-modem protocol under Kermit and do
a redirect of input and output. The only restriction is that the
version of the Z-modem protocol should be a pre-1988 version. I have
been looking around in many places, but up to now I did not encounter
such a version. Is there anyone who could tell me:
- where I can find such a version of the Z-modem protocol
- who has had similar problems a modem pool and Z-modem (for Ultrix
   and OSF1)

Please let me know.

Kees van den Berg